If you have a Chipped, Cracked, or Broken Windshield (or any glass) be sure to check out Safelite: https://safl.it/2RqkfpQ

Check out Samcrac en Espanol/Spanish: https://goo.gl/TeH1tS

Instagram: https://www.instagram.com/samcracc/
Email Me: SamcracAuto@gmail.com

Mail: Samcrac
PO Box 713
Odessa, FL 33556

Thank you to Safelite for providing the replacement windshield on my Audi R8 in exchange for a review of their service.

Comments

    • Djilali Ramdane
      Djilali Ramdane

      There are many components to doing a pro job. One resource I found that successfully combines these is the Magic Painter Method (check it out on google) definately the most incredible info that I've heard of. Check out this great website.

      about 1 month ago
    • mark edwards
      mark edwards

      mole grips grip the edges of the bolt or maybe a ball nosed allen key

      about 1 month ago
    • Michael P
      Michael P

      Use a Vice-Grip to remove then replace with a low profile hex nut.

      about 1 month ago
    • Damien Runner
      Damien Runner

      how much you spend on the R8? overall with purchase and repairs?

      about 2 months ago
    • [Steam]Krypton
      [Steam]Krypton

      You could cut of an Allen-key and try it out.

      about 2 months ago
    • D Ferrari
      D Ferrari

      I had a Grandfather, boss, and python named Wayne... My python was a girl.

      about 2 months ago
    • Benjamin Blackwell
      Benjamin Blackwell

      Not giving it away to a viewer?!?!? WTF Bro?

      about 2 months ago
    • jon 2
      jon 2

      sam  poo

      about 2 months ago
    • yaphett1
      yaphett1

      First cool Safelite commercial. Hope their check cleared, containing your cut.. Why no content of the repair of the front undercarriage damage. Describing how Audi engineering works, is irrelevent.

      about 2 months ago
    • patrick chambers
      patrick chambers

      Nice work on the car bro

      about 2 months ago
    • patrick chambers
      patrick chambers

      I buy that hundred dollars tool for my car it worthed for your car.

      about 2 months ago
    • James M Bryant
      James M Bryant

      Simply amazing find! Great work, and congratulations on your super car!

      about 2 months ago
    • Sochy Eisenberg
      Sochy Eisenberg

      This guy sold his soul with the paid promotions

      about 2 months ago
    • Lucky 13
      Lucky 13

      What shit engineering this car has.

      about 2 months ago
    • bentlikeitsmaker
      bentlikeitsmaker

      Those plates that were put on make me nervous personally honestly how I would have done it was weld it grind it down and cover the whole crack no sharp corners based on working on rigs and similar items no Sharp corners larger the radius the better well to a point just personal opinion only question did you get the other non cracked side done as well

      about 2 months ago
    • Amjad Hussain
      Amjad Hussain

      There is a way to weld your car. Don't worry.

      about 2 months ago
    • Jason Muir
      Jason Muir

      2010 Audi R8 Auto quattro MY10
      $130,000*

      33,000 km
      Coupe
      Automatic
      10cyl 5.2L Petrol

      ASKING PRICE IN AUSTRALIA!

      about 2 months ago
    • Adam Heazlett
      Adam Heazlett

      Dude you must be very wise you got such large ears .Hope you lucky about what big ears big hands .Happy Girls .Adam

      about 3 months ago
    • Chris B
      Chris B

      Dang! I need a new windshield. Will definitely check them out

      about 3 months ago
    • QJAndra
      QJAndra

      At times he's like blues clues for gear heads

      about 3 months ago
    • Jason Maxwell
      Jason Maxwell

      People on previous videos "it will cost more than the car is worth to fix that weld" 40 grand at least. Guy got it fixed for 300 bucks haha.

      about 3 months ago
    • Jason Maxwell
      Jason Maxwell

      I love how all the naysayers from the previous videos who said you never get it fixed or certified and it wasnt worth fixing magically disappeared. The damage is more than you paid right haha OK.

      about 3 months ago
    • Blade Runner
      Blade Runner

      get a hexhead bolt and cut it off so as to slip it past the obstruction. you can even thin the head a bit if necessary. it's just a drain hole...

      about 3 months ago
    • Ben Carteret
      Ben Carteret

      just use some channel locks

      about 3 months ago
    • Sai Chitra Bhanu Maddipoti
      Sai Chitra Bhanu Maddipoti

      Cheap ass guy!!

      about 3 months ago
    • Mark Ward
      Mark Ward

      "A true supercar" with a frame that cracks from normal stress. All well designed and engineered supercars break like that. Yep. The old German car expensive special tool trick. LOL

      about 4 months ago
    • Chris martin
      Chris martin

      get a 10 point allen key and cut it down or cut it down and use vice grips

      about 4 months ago
    • Jim Peppers
      Jim Peppers

      Use an oil evaluator. No need to pull drain plugs.

      about 4 months ago
    • Rubber Duckie
      Rubber Duckie

      TRUE COLD AIR. Dude, I just discovered your channel and I'm already questioning whether or not you believe that your average viewer has a single clue about automobiles. Additionally, this is me just being an ass really, but who just throws all the fasteners they remove on the ground? You said it yourself that the R8 is a special automobile. Treat it like one?

      about 5 months ago
    • Erik Riffelmacher
      Erik Riffelmacher

      For the socket . Find a hex wobble and modify to the Audi spec tool.... Maybe

      about 5 months ago
    • Malick Toure
      Malick Toure

      I'm from Florida

      about 5 months ago
    • Robert Volpendesta
      Robert Volpendesta

      What a beautiful machine! You better clean all that grime up. 😆

      about 5 months ago
    • Taylor Smith
      Taylor Smith

      needle nose vice grips

      about 5 months ago
    • isidro ubaldo espinosa
      isidro ubaldo espinosa

      cut a little short the L key for that screw, solution

      about 5 months ago
    • Cornelius Dr Vanderbilt
      Cornelius Dr Vanderbilt

      Modern Audi (Auto Union) is the later version of DKW (Dampf Kraft Wagon), ''Steam Car''...that stopped producing cars in 1966 ...Audi is a very stupid car ...lives on Advertising and fairy tale images. VW owns it. The 4 Circles represent 4 different car companies merged ..Audi, DKW, Horch and Wanderer.

      about 5 months ago
    • Zayne0216
      Zayne0216

      I moght be a noob for this. I dont do oil change. But my idea is can you pump the oil out of.the engine. Or that just carzy talk?

      about 6 months ago
    • Smooth Move
      Smooth Move

      This almost seems like reality tv.... Because it can't actually be real. even with the repairs you stole it.

      about 6 months ago
    • Smooth Move
      Smooth Move

      Drain the oil out of the two side bolts and call it good.

      about 6 months ago
    • dzejkobone
      dzejkobone

      7:13 Too much of Lambo in this car.

      about 7 months ago
    • Cummins
      Cummins

      Adjustable vise grips. Throw that away after and put a hex in

      about 7 months ago
    • 40Glassman
      40Glassman

      i own my own tiny auto glass company...i want everone to know that there are alot of small autoglass companies who do just as good a job as safelite and for much cheaper. i'm suprised samcrac didnt look around. i would have saved him a couple hundred bucks possibly.and unless your getting the windshield for free for advertizing for safelite, i wish you didnt hype them up so much,,safelite is really hurting us small guys and they ghot enough advertizing

      about 8 months ago
    • Xx-FURIUSKNIGHT 6161
      Xx-FURIUSKNIGHT 6161

      Make your ownsocket

      about 8 months ago
    • tonyacehawk
      tonyacehawk

      Just pull one of the other drain plugs dude

      about 9 months ago
    • Dio Santana
      Dio Santana In reply to tonyacehawk

      That may not guarantee all the oil is out

      about 4 months ago
    • Russell Pehi
      Russell Pehi

      work the bolt out with a pair of vice grips and then cut the outside to fit a standard hex wrench so when you do future ones you just have to use a standard torque wrench

      about 9 months ago
    • Matt Groters
      Matt Groters

      Could you get a 10 point right angle screw driver and cut/file the short end to size with a band or hack saw til you can get in?

      about 9 months ago
    • Julian Yale
      Julian Yale

      They sell Allen wrenches with ball heads on them.

      about 9 months ago
    • Gamer Player
      Gamer Player

      Use The other places to remove oil or use a bit by cutting it in half and use pliers

      about 9 months ago
    • Lycan Gaming90
      Lycan Gaming90

      He sounds like Joe Rogan 👍🏻

      about 10 months ago
    • Jeff !
      Jeff !

      Will the title have Salvage written on it or something different after the inspection passes??

      about 10 months ago
    • alexr101992
      alexr101992

      TBH if i was planning on keeping the car, i would just pull the pan and tap a new drain in a close proximity if it doesn't mess with the engine

      about 10 months ago
    • nuclearcarnie
      nuclearcarnie

      I can't believe how many damned commercials you have to endure to watch YouTube these days!!! It absolutely sucks!!!Great video series either way.

      about 10 months ago
    • EZMode
      EZMode In reply to nuclearcarnie

      Ad block is your friend. Disable for the YouTubers you want to support though.

      about 10 months ago
    • Ad 3yk
      Ad 3yk

      did ppl honestly think you fitted a windscreen yourself? face palm

      about 10 months ago
    • Dukefazon
      Dukefazon

      I used to watch Wheeler Dealers a lot but now that Ed is no longer part of the show I'm not interested. And I found your channel and you pretty much do what I'm looking for in car repair shows.

      about 10 months ago
    • Stryker
      Stryker

      Safelite never did that with my car. There was grease everywhere. Mirrors, windshield, etc. The residue still hasn't come off so thankfully another rock hit my windshield.

      about 11 months ago
    • TheeJeffrocco
      TheeJeffrocco

      Near the end of the video I see in the paperwork that he paid $32,750, value $82,750. I'm so jealous

      about 11 months ago
    • Rainbowstraw
      Rainbowstraw

      I'd bend the tool to fit the drain bolt

      about 1 year ago
    • Dean Larkins
      Dean Larkins

      If you are not familiar with knipex pliers, they are the greatest tool ever invented there one directional self gripping a pair of 10 in will grab that thin edge of that and spin it out easily without using the center.

      about 1 year ago
    • dougfromniu
      dougfromniu

      Stop saying “VIN Number” Number is already in the acronym so it’s just VIN

      about 1 year ago
    • Flick Playz
      Flick Playz

      You just gained yourself a subscriber. KEEP UP THE HARD WORK.

      about 1 year ago
    • I Eat Glowsticks
      I Eat Glowsticks

      Saw off part of an allan key to get to the oil pan

      about 1 year ago
    • sam gallagher
      sam gallagher

      How much did they give you off the windshield for that plug ?

      about 1 year ago
    • OldSchoolWays
      OldSchoolWays

      With all do respect, to me it looks like you don't know what your doing. The aluminum weld repair wasn't done correctly. This weld will fail again. I can tell the weld was done with a spool gun and not a TIG gun and it looks like a beginner welding job. Sorry to be the one to inform you.

      about 1 year ago
    • Rob P
      Rob P

      Take a standard allen/torx wrench and grind down the short arm. Performed this modification for many Allen keys over the years for non-auto applications. I'll split the $100 specialized tool savings with you, lol!

      about 1 year ago
    • D. Natrop
      D. Natrop

      Why not reinforce the other strut mount?

      about 1 year ago
    • rippedray
      rippedray

      channel locks

      about 1 year ago
    • the Last Dab
      the Last Dab

      Vise grips. Both would work

      about 1 year ago
    • Will Doherty
      Will Doherty

      weld a small bit to a small bar, might have to cut a bit with a grinder

      about 1 year ago
    • Thomas
      Thomas

      Wayde is a goddamn god

      about 1 year ago
    • Gerald McCoy
      Gerald McCoy

      Vice grips will do the job

      about 1 year ago
    • Robin Eaglestone
      Robin Eaglestone

      Please tell me that he got both sides done at the same time !? It's a factory flaw !

      about 1 year ago
    • Silverhand290
      Silverhand290

      You can get a snapon part that would get in and remove that oil drain plug. I used to have a set of 'em. and! I think 1 will cost much less than 100 dollars even tho I'm used to buying tools in pounds (U.K)

      about 1 year ago
    • Jaggie McCool
      Jaggie McCool

      what kind of dumb guy is this... he is just giving tips about doing something on this car and then others are doing it for him, so what is the point of this channel

      about 1 year ago
    • Roger
      Roger

      I would also recommend the shit outta any company that gives me a free windscreen and install. Duh!

      about 1 year ago
    • fwj 0078
      fwj 0078

      pointed vice grips to remove the plug

      about 1 year ago
    • Josh Santiago
      Josh Santiago

      Wayne!!! He’s my quality manager. Amazing guy man.

      about 1 year ago
    • Charles Moore
      Charles Moore

      Sell ne that thing need a everyday badass weekend cool dad car

      about 1 year ago
    • Billy Woods
      Billy Woods

      xbox controllers have the same screwdriver thing you could diy one of them to fit

      about 1 year ago
    • Doug Dale
      Doug Dale

      Honestly I say spend the 100 bucks, you're going to change the oil again in the future and I imagine the tool makes it pretty easy.

      about 1 year ago
    • Mycatz2fat
      Mycatz2fat

      Love these vids of this car and how you are fixing it. I'm a little late finding them but enjoying them. I might be a little late but I can tell you how to deal with bolts like that 3rd drain plug. First get a quality bit that fits the bolt. Next grind and file the input part of that bit til it fits flush with the bolt head. Then put the bit in a quality wrench and mark what sticks out the back side. Grind off what sticks out back of the wrench. Now you have a custom tool that actually gives you more leverage to break it loose without stripping the inside of the bolt head. Using that $100 piece of shit that does just that! Once you break it loose use your fingers or a pair of pliers to remove it.

      about 1 year ago
    • Jose Maldonado
      Jose Maldonado

      You may want to blur out the vin number on the video anyone can just take that info.

      about 1 year ago