Have one to sell? Sell now
Incredibles 2 Twin 3pc Childrens Sheet Set


    • Bradley Ogden
      Bradley Ogden

      It's almost been 5 years since you've reviewed this decoder. Could you run this on your layout?

      about 2 months ago
    • Donald Moore
      Donald Moore

      Can these be used for non sound locomotives in DCC ?

      about 4 months ago
    • John MacDonald
      John MacDonald

      With some model of locomotives having minimal space for sound decoders could these decoders be programmed for a locomotive. Then position the boxcar behind your locomotive to mimic the sound of
      your engine. I have some older Kato DCC ready locomotives that are real tight for space especially with the tubes for lights that Kato tend to use.

      about 5 months ago
    • choochoo3985

      Can you lengthen the distance for the click clack. This demonstration reflected 12 foot cars.

      about 1 year ago
    • CresentMoon18

      I thought this was about to be a video on how to send your stuff to mark.

      about 2 years ago
    • William Spears
      William Spears

      hmm mix with bli sound/stock cars

      about 2 years ago
    • Michael88 MK4
      Michael88 MK4

      wow its really cool is this your first railbox car with sound I love how its a high cuber

      about 3 years ago
    • HARPO1ME

      Hay Sir James will these operate like dual mode to use on a dc layout?? l like it.Your video is well done Thanks Again!

      about 3 years ago
    • HexOmega

      Oh my goodness those sounds are terrible. As someone who works with these often, they dropped the ball on the sounds. The flat spot sounds like somebody smacking a cooking sheet around...

      about 4 years ago
    • Samuel Brodersen
      Samuel Brodersen

      very neat

      about 4 years ago
    • lawnmowerdude

      I installed one of these not too long ago and I've been very happy with it so far. I didn't even have to buy special trucks. I just installed small brass pickups on the stock metal axles and its been working great. Even just one car with one of these installed adds so much to a layout.

      about 4 years ago
    • Alex A
      Alex A

      Do you need both trucks to have electrical pick-up like on your model or not necessary?

      about 4 years ago
    • Jeff Dahlgren
      Jeff Dahlgren

      Really good review. I am learning alot from all the videos you and the other guys are doing on youtube. Is there a way we can chat outside of youtube?

      about 4 years ago
    • Justin

      What brand of engine is that, Kato?

      about 4 years ago
    • Justin
      Justin In reply to Justin

      That isn't what I asked.

      about 4 years ago
    • C&L LINES
      C&L LINES

      thanks for the review. What in your opinion and your followers what is the better system for DCC Digitrax or MRC I'am looking at getting my first one and not sure what way to go or how many amps are needed to run a train. Any help will be great thanks.

      about 4 years ago
    • Rusty Rail
      Rusty Rail

      The "clickity clack" sound is set way to fast. When he put them in unison, the engine was doing like 15mph scale, that boxcar was doing like 40mph scale

      about 4 years ago
    • jlwii2000
      jlwii2000 In reply to Rusty Rail

      You can sync that by setting some CV values listed in the video.

      about 4 years ago
    • Aaron Roberts
      Aaron Roberts

      This intelligent consisting feature would be nice on a locomotive decoder.

      about 4 years ago
    • elr2141979

      This would not work well in a intermodal well car

      about 4 years ago
    • elr2141979
      elr2141979 In reply to elr2141979

      @wmg33 there's no place to run to pick up wires.

      about 4 years ago
    • Kris R
      Kris R In reply to elr2141979

      You could do it if you always had a container on the car. Just take the bottom of the container off and it will cover everything. 

      about 4 years ago
    • Aaron Roberts
      Aaron Roberts In reply to elr2141979

      Couldn't you place the speaker and board inside the bottom container ?

      about 4 years ago
    • Greg Smith
      Greg Smith

      Having sound in the rolling stock is a great idea. I love the constitution on the wall behind you even better.

      about 4 years ago
    • Randall Hawkinson
      Randall Hawkinson

      James,  Thanks for this review.  After all these years, I've finally been convinced to covert to DCC by our local club members.  I'm joining the club to learn this new world and to give me a place to run while I'm still under construction.  Although my last four layouts were DC (it's all we had back then), I've had a heck of a time wiring my new one; so, I'm not that far along. The club members said they will help me here at home.  Your review, therefore, has heightened my excitement for the conversion!  I can't wait to get going!  Randy 

      about 4 years ago
    • fumedrummer

      moving stinks.  but, dude.... http://www.radioshack.com/15-watt-soldering-iron-with-grounded-tip/6402051.html#pmin=10&pmax=15&start=3

      about 4 years ago
    • chris shoulders
      chris shoulders

      Good review,but I rather invest my money in a locomotive instead.

      about 4 years ago
    • RockIslandmodeler

      Will it work for N scale?

      about 4 years ago
    • P Mason
      P Mason In reply to RockIslandmodeler

      If it will fit in the box car and you can get a speaker in there.

      about 4 years ago
    • Cascade Custom Trains
      Cascade Custom Trains

      Nice video.

      about 4 years ago
    • Roman-RIZ-Railway

      If not difficult to remove the video instructions on how to install this decoder in the car.
      I am sorry for my Google translation ...

      about 4 years ago
    • Nick

      Kinda cool....only thing is the clickity clack wouldn't be proto on mainline track seeing how its all welded rail for the most part. The flat spot sounds are also a little excessive......if I was standing by a main watching a roll by of a passing train and heard that I would be a bit concerned. All in all pretty neat. Good review!

      about 4 years ago
    • Train Productions by iLoVeSD70Ace35
      Train Productions by iLoVeSD70Ace35

      Awesome review James!!

      about 4 years ago
    • Pittsburgh Mainline Productions
      Pittsburgh Mainline Productions

      To use this as a cab car and blow the horn, do you need to add it to the train and blow the horn on the locomotive's address to also blow the cab car's horn?  Or to blow the soundcar's (cab car) horn, do you need to enter it's address into the throttle?   

      about 4 years ago
    • bodvarland

      Sounds more like a johndeer b than a train on track.

      about 4 years ago
    • choochoo3985
      choochoo3985 In reply to bodvarland

      It really does. Ha!

      about 1 year ago
    • Frank Meno
      Frank Meno

      Great review on the soundtraxx am going too look in to them, great job James!!!

      about 4 years ago