This is my scratchbuilt (from plans) 28" wingspan F-22 Parkjet constructed from depapered foamcore. Designer was Tomhe (rcGroups). Plans for the stock plane are available on RCgroups.com, parkjets.com, and 6mmflyrc.com. Original plans were for a profile jet with a mid-mounted pusher prop motor. I added a 3d nose and switched out the motor to a 64mm edf. Very happy with this plane. This was one of my best flights! Luckily I was able to get it on camera!!! Enjoy and thanks for watching!

Comments

    • Mostafa Mamun
      Mostafa Mamun

      what is the recommended battery for this 64mm edf plane...?

      about 3 months ago
    • Sumit Bhagat
      Sumit Bhagat

      👍

      about 6 months ago
    • Big*Apes1010ʕʘ̅͜ʘ̅ʔ
      Big*Apes1010ʕʘ̅͜ʘ̅ʔ

      Is it suitable for beginner. Bro?

      about 8 months ago
    • Fun R/C Projects
      Fun R/C Projects

      👍

      about 10 months ago
    • Hiếu pham
      Hiếu pham

      can you tell me your facebook or twiter ?

      about 2 years ago
    • hillock10
      hillock10

      This is NOT real high alpha flying, just borderline momentary stuff. You should see a real alpha flyer, nose up high, hold the position with stability for a long time.

      about 3 years ago
    • Greg Tanous
      Greg Tanous

      that landing bell - seemed was kinda funny LOL

      about 4 years ago
    • InsaneTurbo
      InsaneTurbo

      Nice video, good to see. I'm building a Raptor that was supposed to use pusher prop, but now I'll throw in my extra EDF. Thanks for posting.

      about 4 years ago
    • hillock10
      hillock10

      Did not see and high alpha.  

      about 5 years ago
    • Gustavo Sganzerla
      Gustavo Sganzerla

      Great airplane and great video too.  Thanks for posting, and regards from Brasilia, Brazil.

      about 5 years ago
    • Mario
      Mario

      What are the dimensions?

      about 5 years ago
    • gerard chareyre
      gerard chareyre

      je confirme, l'herbe est bien verte, nous sommes au printemps, l'avion on le decouvre quant?

      about 5 years ago
    • Ron_RC
      Ron_RC

      Ha ha! That is the best hi alpha I've ever seen a ducted fan do. I've been thinking of skinning my flat foam F-22 but have been having too much fun just flying it around as is. All the best and Happy flying!

      about 5 years ago
    • Joshua Panola
      Joshua Panola

      Nice.

      about 6 years ago
    • Jake Woods
      Jake Woods

      and may i also ask how much the plane weighs and the thrust the edf produces?

      about 7 years ago
    • Snice02
      Snice02

      Battery is a 2200mah 3S 30C lipo.

      about 7 years ago
    • Snice02
      Snice02

      Not on this model. The wing is simply flat plate style wing. If you were to put a KFm wing onher,I would suggest the KFm4.

      about 7 years ago
    • Jake Woods
      Jake Woods

      how many cells and how man Mah is the battery?

      about 7 years ago
    • Christophe Mach
      Christophe Mach

      Are you using any KF airfoils?

      about 7 years ago
    • Snice02
      Snice02

      @sidewayz180sx Twin 50mm edf units would work, but I feel that a single 50mm unit would not produce enough thrust for the model to be fun. I'm sure it would fly, but you would only be able to do lazy figure-8's around the field. Scaling the airframe down to around 18-20" wingspan would be a better size for a 50mm EDF unit. Check my other videos -- I have one of this airframe with twin 55mm EDFs installed. Thanks for watching!!!

      about 7 years ago
    • Christophe Mach
      Christophe Mach

      will a 50mm edf unit work for this?

      about 7 years ago
    • youtwoba
      youtwoba

      Hey nice job! I love hat cam :0) Most of the time that is all I got, great job keeping it close to the camera! Hatcam works great if you keep it close to camera, but we can't always do that!

      about 9 years ago
    • mio
      mio

      awsome, but i dont like the hat cam.

      about 9 years ago